Gramofon Audio-Technica AT-LP2X
Šifra artikla: TRTATH017
Kratki opis
Detailed sound
The AT-LP2X is a fully automatic belt-drive turntable with switchable controls to play 12” and 7” vinyl records at one of two speeds—33-1/3 and 45 RPM. Being fully automatic, starting and stopping your records is done simply by pressi
Sviđa mi se (0)
189,00 €
Izaberite način plaćanja internet bankarstvom i ostvarite dodatnih 5% popusta.
Iznos uštede
9,45 €
24 mj. jamstvo
Nedostupno, u dolasku
Prodaja na rate bez kamata
već od
7,88 €
mjesečno
Plaćanje na 24 rate beskamatno online
Plaćanje na 12 rata beskamatno i jednokratno online
Proizvod trenutno nije dostupan
Plaćanje pouzećem i karticama na rate!
Ekspresna dostava 2.89 €
Sigurna kupovina
Opis
Detailed sound
The AT-LP2X is a fully automatic belt-drive turntable with switchable controls to play 12” and 7” vinyl records at one of two speeds—33-1/3 and 45 RPM. Being fully automatic, starting and stopping your records is done simply by pressing the START and STOP buttons on the front of the player. With these controls, you won’t need to manually lift the needle to play your favourite music—the buttons will automatically lift and place the tonearm. Should you wish to do it manually, however, a hydraulically-damped lift control allows the stylus to be precisely and safely lowered and raised at any point on the record.
Automatic
The AT-LP2X’s balanced straight tone arm comes with a 1/2” mount universal headshell and Audio-Technica’s AT91R Dual Moving Magnet phono cartridge with the option to switch it out for other moving magnet or moving coil cartridges. This is all to give you an excellent, high-fidelity listening experience and the flexibility to upgrade. It has an anti-resonance, die-cast aluminium platter with a felt mat; boasts a damped base construction for reduced low-frequency feedback; and includes a 45 RPM adapter and hinged, clear-smoked, dust cover.
Great build
On the back of AT-LP2X is a PHONO/LINE switch; an attached dual-RCA output cable; and an AC input to connect the included power cable. Depending on your setup, switch the PHONO/LINE switch to LINE when you are using the AT-LP2X with a stereo preamp, or to PHONO—which will turn on the internal preamp—when you are connected directly to speakers.
Specifications:
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio > 60 dB
Output Level
“Phono" 3.5 mV nominal at 1kH, 5cm/sec
"Line" 220mV nominal at 1kH, 5cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
Power Supply Requirements 220 to 240 V AC / 50/60 Hz
Dimensions 435 mm × 353 mm ×128 mm (W×D×H)
Weight 5.2kg
The AT-LP2X is a fully automatic belt-drive turntable with switchable controls to play 12” and 7” vinyl records at one of two speeds—33-1/3 and 45 RPM. Being fully automatic, starting and stopping your records is done simply by pressing the START and STOP buttons on the front of the player. With these controls, you won’t need to manually lift the needle to play your favourite music—the buttons will automatically lift and place the tonearm. Should you wish to do it manually, however, a hydraulically-damped lift control allows the stylus to be precisely and safely lowered and raised at any point on the record.
Automatic
The AT-LP2X’s balanced straight tone arm comes with a 1/2” mount universal headshell and Audio-Technica’s AT91R Dual Moving Magnet phono cartridge with the option to switch it out for other moving magnet or moving coil cartridges. This is all to give you an excellent, high-fidelity listening experience and the flexibility to upgrade. It has an anti-resonance, die-cast aluminium platter with a felt mat; boasts a damped base construction for reduced low-frequency feedback; and includes a 45 RPM adapter and hinged, clear-smoked, dust cover.
Great build
On the back of AT-LP2X is a PHONO/LINE switch; an attached dual-RCA output cable; and an AC input to connect the included power cable. Depending on your setup, switch the PHONO/LINE switch to LINE when you are using the AT-LP2X with a stereo preamp, or to PHONO—which will turn on the internal preamp—when you are connected directly to speakers.
Specifications:
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio > 60 dB
Output Level
“Phono" 3.5 mV nominal at 1kH, 5cm/sec
"Line" 220mV nominal at 1kH, 5cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
Power Supply Requirements 220 to 240 V AC / 50/60 Hz
Dimensions 435 mm × 353 mm ×128 mm (W×D×H)
Weight 5.2kg
Moglo bi vas zanimati i ...
Radio Camry CR1180, internetski
73,50 €