Hladnjak za procesor Arctic Freezer i35, 1x120mm, Intel
Šifra artikla: 0001255150
GLAVNE SPECIFIKACIJE:
- Podnožje Intel: LGA1200/1700
- Veličina ventilatora : 1x120mm
- RGB: NE
Sviđa mi se (1)
47,70 €
72 mj. jamstvo
Izaberite način plaćanja internet bankarstvom i ostvarite dodatnih 5% popusta.
Iznos uštede
2,39 €
72 mj. jamstvo
Nedostupno, u dolasku
Prodaja na rate bez kamata
već od
1,99 €
mjesečno
Plaćanje na 24 rate beskamatno online
Plaćanje na 12 rata beskamatno i jednokratno online
Proizvod trenutno nije dostupan
Plaćanje pouzećem i karticama na rate!
Ekspresna dostava 2.89 €
Sigurna kupovina
Opis
Compact Performance Meets Modern Design
Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.
Ultimate Performance Thermal Paste
The Freezer i35 comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.
Easy Installation and Unlimited RAM Clearance
The Freezer i35 is a socket-specific installation variant for Intel Socket LGA 1700, 1200 and 115x. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer i35. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.
Specifications:
Compatibility
Intel Socket: 1700, 1200, 115X
Ram Clearance: unlimited
Operating Ambient Temperature: 0—40 °C
Heatsink
Heatpipes: 4
Fin Material: Aluminum
Number of Fins: 54
Fin Thickness: 0.4 mm
Thermal Paste: MX-5 (0.8 g)
Fan
Fan Size: 120
Fan Speed: 200—1800 rpm
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.35 Sone
Current: 0.12 A
Connector: 4-Pin
Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.
Ultimate Performance Thermal Paste
The Freezer i35 comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.
Easy Installation and Unlimited RAM Clearance
The Freezer i35 is a socket-specific installation variant for Intel Socket LGA 1700, 1200 and 115x. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer i35. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.
Specifications:
Compatibility
Intel Socket: 1700, 1200, 115X
Ram Clearance: unlimited
Operating Ambient Temperature: 0—40 °C
Heatsink
Heatpipes: 4
Fin Material: Aluminum
Number of Fins: 54
Fin Thickness: 0.4 mm
Thermal Paste: MX-5 (0.8 g)
Fan
Fan Size: 120
Fan Speed: 200—1800 rpm
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.35 Sone
Current: 0.12 A
Connector: 4-Pin
Tehničke specifikacije
| Podnožje Intel | LGA1200/1700 |
| Veličina ventilatora | 1x120mm |
| RGB | NE |
